Steel Door
 
Steel Door
s

Welldoors Engineers is a leading & trusted manufacturer, Exporter & supplier of Pressed Steel Doors, Steel Doors, steel Windows, Windows, Ventilators, Rolled section doors, Windows, Ventilators etc. in wide-spectrum of sizes & design.We envisage conquering every possible location in the domestic & International market through modern design, matchless material use, customer-oriented approach & top-level customer service.

Our HMPS doors & Steel Doors are the most trusted product among Builders, Architects & Real-estate consultants. Due to this we have major presence in numerous industries, hospitals, schools, hotels, commercial & domestic establishments.

Flush Doors  
   
    • Steel Doors are made from sheet thickness varying from 1mm to 3mm, depending upon customers requirement
    • Steel Doors are provided with Double sheet to give a flush effect
    • Insulation could be of glass wool, rock wool, thermocole, polyurethane foam etc
    • View panel of desired size & shape can be provided
    • Desired fittings of Stainless Steel, Aluminium, Brass or Mild Steel can be provided
    • Stiffeners are provided on the frame for additional strength
    • Frame is provided with tie bars to prevent frame deflection
    • Butt hinges / Pin type hinges with bearings can be provided
    • Holdfasts or anchor fasteners shall be provided for fixing the frame with the wall
    • Mortar guard & Pad plates shall be provided

Fire Proof Steel Doors  
   

  • Our Industrial Steel Doors shutters are made from minimum 0.8mm thick sheet
  • Steel Doors frames are made from minimum 1.6mm thick sheet
  • Fire rating upto 3 hrs.
  • Fire Proof Doors Prime painted with lead-free epoxy resin
  • Insulation could be of honeycomb core, mineral fireboard, polystyrene
  • Shutter Thickness shall be 50mm thick
  • Steel Doors Edges shall be seamless
  • The top, bottom & side closures are fabricated from 1.5mm stiffeners welded to front & back door skins
  • Hinge Reinforcement, door close reinforcement, lock reinforcement & strike plate reinforcement shall be provided

Glazed Doors  
   
    • Glazed Doors are made from sheet thickness varying from 1mm to 3mm, depending upon customers requirement
    • Aluminium Glazing is provided to hold the glass
    • Desired fittings of Stainless Steel, Aluminium, Brass or Mild Steel can be provided
    • Stiffeners are provided on the frame for additional strength
    • Frame is provided with tie bars to prevent frame deflection
    • Butt hinges / Pin type hinges with bearings can be provided
    • Holdfasts or anchor fasteners shall be provided for fixing the frame with the wall
    • Mortar guard & Pad plates shall be provided with steel doors

Panic Bar Doors  
   
    • Panic Bar Steel Doors are made from sheet thickness varying from 1mm to 3mm, depending upon customers requirement
    • Panic Bars Doors of various kinds can be provided for Emergency Exit Doors
    • Doors are provided with Double sheet to give a flush effect
    • Insulation could be of glass wool, rock wool, thermocole, polyurethane foam etc
    • Stiffeners are provided on the frame for additional strength
    • Frame is provided with tie bars to prevent frame deflection
    • Butt hinges / Pin type hinges with bearings can be provided
    • Holdfasts or anchor fasteners shall be provided for fixing the frame with the wall
    • Mortar guard & Pad plates shall be provided

Sliding Steel Doors  
   
  • Sliding Steel Doors of various sizes can be made
  • Sliding Steel Doors can be made from pipe structure as well as from MS / GI sheet, depending upon on the size & customers requirement
  • If the door is made from pipe structure various types of cladding can be provided
  • The Steel sliding door can also be motorized if desired
Rib Steel Doors  
   
    • Rib Steel Doors are made from sheet thickness of 1.25mm
    • Steel Doors are provided with Single sheet
    • The sheet is bent on a press brake to give extra strength to the door
    • Desired fittings of Aluminium & Mild Steel can be provided
    • Stiffeners are provided on the frame for additional strength
    • Frame is provided with tie bars to prevent frame deflection
    • Butt hinges / Pin type hinges with bearings can be provided
    • Holdfasts or anchor fasteners shall be provided for fixing the frame with the wall
    • Mortar guard & Pad plates shall be provided
    • These doors are specially meant for low budget housing & are extremely cost  effective

HMPS Steel Windows  
   
    • HMPS Steel Windows are made from sheet thickness varying from 1mm to 3mm, depending upon customers requirement
    • Desired fittings of Stainless Steel, Aluminium, Brass or Mild Steel can be provided
    • Steel Windows Stiffeners are provided on the frame for additional strength
    • Butt hinges / Pin type hinges with bearings can be provided
    • Holdfasts or anchor fasteners shall be provided for fixing the frame with the wall
    • Mortar guard & Pad plates shall be provided with Steel Windows
    • Safety bars can also be provided with Steel Windows

Louvered Windows
   
  • Louvered windows have built in safety bars
  • Special Nylon bushings are provided for smooth & trouble free operation
  • Louvers Steel Windows can be adjusted & locked at different positions to adjust air flow, light & rain control
  • Stiffeners are provided on the frame for additional strength
  • Holdfasts or anchor fasteners shall be provided for fixing the frame with the wall
  • Mortar guard shall be provided with Steel Windows
  • These windows are extremely useful for schools, hostels, factories & commercial buildings eliminating recurring cost due to glass breakage

'Z' Section Windows
   
  • ‘Z’  Section windows are made from IS sections
  • MS fittings such as Box Hinges, Lock H&le & Pegstay shall be provided.
  • Aluminium bidding can be provided for holding the glass
  • Wherever the size of the window is big, Press Metal Bars shall be provided horizontally & vertically for joining the Steel windows
  • Safety bars can also be provided with Steel Windows
Ventilators  
   
    • Steel Ventiators are made from sheet thickness varying from 1mm to 3mm, depending upon customers requirement
    • Steel Ventilators can be provided with glass louvers or with steel louvers
    • Stiffeners are provided on the frame for additional strength
    • Holdfasts or anchor fasteners shall be provided for fixing the frame with the wall
    • Mortar guard shall be provided with steel ventilators
    • Safety bars can also be provided with steel ventilators
HMPS Frames  
   
    • HMPS Frames can be made from sheet thickness varying from 1mm to 3mm, depending upon customers requirement
    • Stiffeners are provided on the frame for additional strength
    • HMPS Frame is provided with tie bars to prevent frame deflection
    • Butt hinges / Pin type hinges with bearings can be provided with HMPS Frame
    • Holdfasts or anchor fasteners shall be provided for fixing the frame with the wall
    • Mortar guard shall be provided over hinges
 
2009 Copyright Welldoor Powerd by Arihant Infotech